Status:
USED-C
Quantity:
1
Unit Type:
Separator
Province:
British Columbia
City/Location:
Fort St. John

RJV- 30” x 10’-0”s/s, 600# ANSI, 1440 psi, 3-Phase

V-9000 Vertical Mistex c/w...

* 1440 psig Design Pressure

* 100° F Design Temperature

* 1/8" Corrosion Allowance

* 1.250" Thick SA-516-70 Shell

* 1.250" Thick SA-516-70 Heads

* 0.250” Thick SA-36 Steel Plate

-Inlet Diverter

-Float Hood Baffles

-All Internals


400BBL-

QAP 400 BBL Single Wall Steel Horizontal Storage Tank

TK-9100 *** 400 BBL (60000L) Liquids Storage

Designed And Constructed Using ULC-603.1 As A

Guideline, c/w A Manufacturers Label, And As Follows...

* Dimensions; 11’0 Dia. x 12’ Shell Length

* Ends; Flat & Flanged ASTM A36 3/16” Thick

* Primary Shell; ASTM A36 3/16” Thick

* Secondary Sell; ASTM A36 10-11 Gauge Thick /300° Wrap

* Design Pressure; 2.0 psi

* (2) 8” 150# ANSI RFSOF; -(1) Vent

* (1) -(1) Vent C/w Thief Hatch

* (2) 4”NPT Tank Flange;

-(1) Inlet Nozzle

-(1) Gauge Board Connection

* (2) 3” 150# 3,000# Coupling; -(1) Suck Out Nozzle

* (1) 2” 150# 3,000# Coupling; -(1) LSH Nozzle (Future)

* (1) 2” 150# 3,000# Coupling; -(2) Clean Out Nozzle

C/W Internal weir plate / Internal 2” and 3” piping load out and cleaning.

* (1) Interstice Monitor LG Nozzle / * (1) Name Plate

* (2) Steel Tank Saddles c/w Straps

* Interior Finish; Devoe Epoxy Coating

* Exterior Finish; 1 Coat Of Black Gilsonite/Neotar Paint


Building-

RJV- 11’ 6” Wide x 38’-0 Long c/w...

* 12”@72 Wide Flange Beam -Main Skid Base

* 6”@15 Wide Flange Beam -Main Cross Beams

* 6" @ 8.2 Channel Iron -Periphery & Support Beams

* 3/16" Checkered Plate -Flooring

* 2-7/8” Drill Stem -Pull Bars Both Ends

* 3" Poly-Urethane Foam -Under-Skid Insulation

* -12” x 12’ Skid Drain Piped to Skid Edge C/w Plugged Ball Valve

* 3” x 3” x 1/8” drip containment around Inside perimeter of building

* 4” Square tubing mast lift c/w hand crank winch

Heated

We have the P&ID, drawings, inspection etc.


If you wish to view this item please contact Marlon @ 403.815.2016

For all purchase inquiries, please contact us via email at liquidations@energyauctions.ca or telephone at (403) 815-2016

  • 5% GST (Goods & Service Tax) where applicable on all sales will be applied.
  • International tax exemption rules will apply.
  • Buyer will receive an invoice immediately following confirmation, wiring instructions for payment will accompany.
  • All purchases will be Exworks from location, nothing will be released until payment in full is received and cleared ENERGY AUCTIONS IN TRUST.
  • All sales will be handled in Canadian Funds.
  • All items are sold "as is, where is" unless otherwise stated in "details description".
  • It is strongly recommended that buyer's preview items before purchasing.
  • 1% Administrative Fee will be added to all purchases

Similar

9' x 40' Separator

Spectrum Built Size: 108" x 40' s/sYear: 2019Service: SourCRN: .213MAWP: 943psi3 phaseUnit is sitting in a yard. Will need to...

Panax 30" x 8' Header Pkg

Mfg: Panax Oil & Gas Inc30" x 8'Service: RT1C.A: 1/8”CRN: .2132” DumpMAWP: 720psiYear: 20114-6 Well HeaderSkidded, HousedH...

Penfabco Separator and Tank pkg

Year built- 2000RT2CA- 0MAWP- 1436psi @ 130FMDMT- -20F @ 1436psiCRN- .213HeatedMethanol tank and Containment includedSkidded with ...

Subscribe to our mailing list

Equipment to sell?